top of page
EXTEND LIGHT MACHINERY CO., LTD.

Auto Double Surface Planner - GY Series
GY-450/610S

Auto Double Surface Planner - GY Series GY-450/610S

Features

01
Industrial Pulley & Drive Belt Design

1/1

All EXTEND LIGHT Industrial Double Surface cutterheads are driven by dynamically balanced pulleys and tooth style drive belts ensuring maximum power transmission and zero vibration. The 610 series calls for up to(6)“V”belts on top and (^) on bottom cutterheads. The 820/1000 series employs 8 belt to each cutterhead.

03
Precise Elevation

1/2

Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four lifting columns. This system ensures long term parallelism of cutterheads and machine table. (Patented)

05
Bottom Cutterhead Maintenance Carriage

1/1

Cutterhead carriage allows access to bottom cutterhead in 1-2 minutes. Quick access facilitates knife changing and quick change of damaged knives. Also allows bottom cutterhead bearings to be replaced in minutes.

07
Cast Table with Heavy Chrome Plating

1/1

All EXTEND LIGHT surfacer beds are constructed of the highest grades of cast iron, heat treated, precision ground, then heavily chromed and polished. We guarantee the heaviest chrome plating of any importer. Heavy chrome plating provides incredible wear and friction free flow of materials and low wear.

09 Spike Conveyor for Highly Calibrated Thickness and Constant Feeding

1/1

By allowing the spike/fingers to float as much as 3/4”, the ultimate design in limber straightening is employed. With flat bottom surface to reference from, the top cutterhead work is guaranteed to be precisely calibrated and flat. The spikes also do an excellent job of feeding extremely rough and tapered lumber.

02
Centralized Control Panel with Digital Cutterhead Positioner

1/1

Conveniently located at the front of infeed bed. Amperage meters are standard for top & bottom cutterheadmotor as well as feed motor. Amp meters for the cutterheads allow an important reference when surfacing at higher speeds with heavy stock removal. The digital positioner employs a ballscrew/encoder design provides positioning accuracy of .001" accuracy.

04
Flexible Transmission Shaft

1/1

Eliminating he conventional chain or belt drive which may cause power loss or accuracy problems. The transmission system is directly by flexible shafts shafts for high accuracy and full power transmission.

06
Controls Cabinet

1/1

All electrical controls are neatly positioned in a remote dust proof cabinet. EXTEND LIGHT employs highest technology available in all electrical components. All components are UL approved for U.S installations. Y Delta start up allows soft start of all cutterhead and feed motors.

08
Auto Lubrication/Oilers

1/1

The conveyor system is constantly lubricated by a dependable electronic oiler ensuring maximum chain and bearing life. Oiler allows variable adjustment of volume and frequency of oil flow for all feed rates and surfacing conditions.

Design Guidance

  • Rugged cast iron ad plate steel fabrication provide long term dependability and low maintenance.

  • Infeed conveyor/carpet(spiked) allow precision jointing accuracy especially on warped or twisted lumber.

  • Computerized top cutterhead positioner is accurate ±0.05mm ensuring quick and accurate setup.

  • Cutterhead tooling technology guarantees low noise, reduced power requirements, minimal operations cost, and repetitive finish on the most difficult hardwoods.

  • Feed speeds up to 8-25M/min. allow the EXTEND LIGHT double surfacer to meet high production demands.

  • GY-610SS Feed speed 10-40M/min, GY-610ST Feed speed 10-60M/min

  • Increased horsepower series surfacers provide greater capacity for stock removal while keeping finish at optimum levels.

  • Patented lifting column system (synchronized transmission) guarantees repetitive setup and long-term dependability.

  • Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design vs. chain and constant finish.

  • Cutterheads are of solid steel construction, dynamically balanced and mated with precision pulleys.

  • Cutterheads are supported by “NSK” class 7 precision ball bearings and precision housings.

  • Chromed bed is standard on all EXTEND LIGHT double surfacers yielding optimum wear.
    New guards and skirts provide comprehensive operator safety.

Machine Description

Machine Specifications

  • All specifications, dimensions and design shown in website are subject to change without notice.

  • Please refer in specifications in quotation.

EXTEND LIGHT MACHINERY CO., LTD.

TEL/ +886-4-2686-7755(rep.)
FAX/ +886-4-2686-2266
E-MAIL/ extendlt@ms13.hinet.net

ADD/ No.7, Lane 568. Erkan Road, Shuei-Mei Village, Waipu Dist, Taichung, 438,Taiwan

bottom of page