 |
|
EXTEND LIGHT
Auto Double Surface Planer
Maximize your wood planing with the quality proven planer.
|
| POWERFUL FEATURES FOR GREATER
PRODUCTIVITY |
| Heavy duty chain drive, coupling conveyer belt and
roller, synchronous running, down roller powered also. |
 |
|
|
SPIKE CONVEYOR FOR HIGHLY CALIBRATED THICKNESS AND CONSTANT
FEEDING
By allowing the spike/fingers to float as much as 3/4", the ultimate
design in lumber straightening is employed. With flat bottom surface
to reference from, the top cutterhead work is guaranteed to be
precisely calibrated and flat. The spikes also do an excellent job
of feeding extremely rough and tapered lumber. |
 |
|
BOTTOM CUTTERHEAD MAINTENANCE CARRIAGE
Cutterhead carriage allows access to bottom cutterhead in 1-2
minutes. Quick access facilitates knife changing and quick change of
damaged knives. Also allows bottom cutterhead bearings to be
replaced in minutes. |
 |
|
|
CENTRALIZED CONTROL PANEL WITH DIGITAL CUTTERHEAD POSITIONER
Conveniently located at the front of in feed bed. Amperage meters
are standard for top & bottom cutterhead motor as well as feed
motor. Amp meters for the cutterheads allows an important referance
when surfacing at higher speeds with heavy stock removal. The digital positioner employs a ballscrew/encoder design that provides
positioning accuracy of+.001" accuracy. |
 |
|
CAST TABLE WITH HEAVY CHROME PLATING
ALL EXTEND LIGHT surface beds are constructed from the highest
grades of cast iron, heat treated, precision ground, then heavily
chromed & polished. We guarantee the highest heaviest chrome plating
of any importer. Heavy chrome plating provides incredible wear and
friction free flow of materials. |
 |
|
|
SET UP THICKNESS QUICKLY
This machine provides a quick thickness setting, just put a block
sample with the same thickness on the material stand, start to
descend the top seat which will automatically position the thickness
of work-piece when the limited switch touched the block sample. It
will save the setting time for thickness with this method. |
 |
|
SPRIAL CUTTER HEAD (OPTIONAL ATTACHMENT)
Upper plane and down plane can be attached with the advanced
screwed cutter head. It can discharge the chips better when
planing and is noiseless. More delicate for the thick wooden
block. |
 |
|
|
|
 |
| MODEL |
EL-400 |
EL-610 |
| Max. Width of Work-piece |
400mm (16") |
610mm (24") |
| Max. Thickness of
Work-piece |
160mm (6") |
160mm (6") |
| Min. Thickness of
Work-piece |
6mm (1/4") |
6mm (1/4") |
| Min. Length of
Work-piece |
30mm (12") |
30mm (12") |
| Knives Number of
Each Cutter head |
4 pcs x 2 |
4 pcs x 2 |
| Blade Size |
400 x 6 x 38mm
(16" x 1/4" x 1-1/2") |
610 x 6 x 38mm
(24" x 1/4" x 1-1/2") |
| Cutter Head Running
Speed |
4200 RPM |
4200 RPM |
| Feeding Speed |
6-20 m/min
Variable Speed Without Gear |
6-20 m/min
Stepless Variable Speed |
| Upper Cutter head Motor |
10 HP (15 HP optional) |
15 HP (20 HP optional) |
| Down Cutter head Motor |
10 HP |
10 HP (15 HP optional) |
| Feeding Motor |
2 HP |
3 HP |
| Lift Motor |
1 HP |
1 HP |
| Dimensions Of Machine |
L2350 x W1420 x H1700
mm |
L2730 x W1630 x H1700
mm |
| Dimensions Of Carton |
L2450 x W1520 x H1800
mm |
L2950 x W1730 x H1830
mm |
| Net Weight / Gross
Weight |
2450 kgs / 2900 kgs |
3300 kgs / 3700 kgs |
| Blade Number Of Sprial
Cutter Head |
120 pcs x 2 |
180 pcs x 2 |
| Counter Of Thickness
Setting |
Optional Attachment |
Optional Attachment |
| * This Company reserves
the right of change, it is subject to change without notice. |
|
